A B C D E F G H I JK L M N O P Q R S T U V W

Quality Testing Equipment

Processing equipment, laboratory supplies and instrumentation for the soft drink, food, chemical, pharmaceutical, water, and waste water industries.

Your product quality is our business.

Absorbent, Ascarite II

 Click on the picture for a larger view
T-03-067 20 mesh, 500 gm
T-03-068 30 mesh, 500 gm
Quantitative absorbant of carbon dioxide and nitrogen dioxide. Clearly visible, self-indicating color change occurs within a narrow zone. The carbon dioxide absorption capacity is 20-30% (w/w).

RETURN

Absorbent, Indicating, Drierite

 Click on the picture for a larger view
T-03-070 4 mesh, 5 lbs
T-03-071 8 mesh, 5 lbs
T-03-072 10-20 mesh, 5 lbs
An efficient drying agent giving visual indication of the progress of absorption and exhaustion. As Drierite absorbs moisture, indicator changes from blue to rose red.

RETURN

Air Tester, Pouch, Low Cost

 Click on the picture for a larger view

                     

T-03-821 Unit, complete

       This is a low cost method of measuring the amount of air in food and beverage pouches.

Place the assembly in a sink filled with water. Seal off a corner of the pouch with a clamp and then cut off the corner. Place the pouch under the assembly and squeeze out the product. The bubbles of air are released and rise up into the measurement buret.

RETURN

Balance, Analytical, Electronic, Mettler

 Click on the picture for a larger view
T-13-103 210 gm capacity
T-13-240 Transformer for 230 VAC

Perfect precision weighing with speed and convenience, the unit's rugged construction assures stable results and peak performance day after day. Operated with a single control bar, one touch guides you through each function. The chamber and pan are accessible from both sides and the top.

The unit is available with an optional RS232C interface for communication with printers, calculators or computers.

Capacity: 210 gm
Sensitivity: 0.1 mg
Resolution: 0.1 mg
Reproducibility: 0.1 mg
Range-Optical Scale: 0-210 gm

Overall Dimensions: 8-1/4" x 13-1/4" x 12-1/2 high"
Pan Dimensions: 3-1/4"

Voltage: 115 VAC (230 VAC requires optional transformer), 50/60 Hz.

RETURN

Balance, Electronic, Mettler

 Click on the picture for a larger view
T-13-110 2,100 gm capacity, 0.01 gm divisions 
T-13-106  3,100 gm capacity, 0.1 gm divisions 
T-13-111  100 gm capacity, 0.01 gm divisions
T-13-113  6,100 gm capacity, 0.01 gm divisions
T-13-108  8,100 gm capacity, 0.1 gm divisions 
 Features:
Tare: Full range
Stabilization time: 2 Seconds
Calibration: Push button automatic
Electrical Power: 115 or 230 VAC, 50/60 Hz
IO: Built-in RS232 interface
Other capacities available. Please inquire.

RETURN
Click on the picture for a larger view

Balance, Electronic, Ohaus
T-13-101 2,100 gm capacity, 0.01 gm divisions 
T-13-102 4,100 gm capacity, 0.1 gm divisions 
T-13-103 4,100 gm capacity, 0.01 gm divisions 
T-13-104  8,100 gm capacity, 0.1 gm divisions
T-13-105 Power adapter and cord, 220 VAC
    Features:
Tare: Full Range
Stabilization Time: 2 to 2.5 Seconds
Calibration: Automatic, Internal
Electrical Power: 115 VAC, 50/60 Hz
A power adapter and cord set are available for 220 VAC. Please specify UK, Europe or Australia.

RETURN
Click on the picture for a larger view

Balance, Spring-Loaded, Triple Beam, Ohaus
T-13-125  Scale, complete, 2,610 gm capacity in 0.1 gm increments  
T-13-126  Replacement weight set, 2 - 1000 gm, 1 - 500 gm
T-13-127 Scale, complete, 5 lb, 2 oz capacity in 1/64 oz increments 
• Spring-loaded zero-adjust compensator with magnetic damping.
• Unaffected by out of level conditions.
• Includes 6 inch stainless steel plate and 1 set of weights.
• Dimensions - 18" x 6" x 7".

RETURN

Beaker, Glass, Graduated

 Click on the picture for a larger view
T-09-131 50 ml 
T-09-132 50 ml, 12/pk 
T-09-133 100 ml
T-09-134 100 ml, 12/pk 
T-09-135 150 ml
T-09-136 150 ml, 12/pk 
T-09-137 250 ml
T-09-138 250 ml, 12/pk 
T-09-139 400 ml
T-09-140 400 ml, 12/pk 
T-09-141 600 ml
T-09-142 600 ml, 12/pk 
T-09-153 1000 ml
T-09-154 1000 ml, 12/pk 
T-09-155 2000 ml
T-09-157 2000 ml, 12/pk 
Other sizes are available. Please inquire.

RETURN

Beaker, Plastic, Graduated

 Click on the picture for a larger view
T-09-143 150 ml 
T-09-144 150 ml, 6/pk
T-09-145 150 ml 
T-09-146 150 ml, 6/pk
T-09-147 150 ml 
T-09-148 150 ml, 6/pk
T-09-149 150 ml 
T-09-150 150 ml, 6/pk
T-09-151 150 ml 
T-09-152 150 ml, 6/pk

RETURN

Beaker, Stainless Steel, Non-Graduated

 Click on the picture for a larger view
T-21-170 125 ml
T-21-172 250 ml
T-21-173 600ml
T-21-174 1200 ml
T-21-175 2000 ml
T-21-176 3000 ml
T-21-177 4000 ml
These beakers have a pouring lip but no handle. T-304 stainless steel.

RETURN

Bottle Crowner, Hand, Heavy Duty

 Click on the picture for a larger view
T-18-115 Unit, complete
T-18-117 Steel Crowns, 100/Bag
For capping bottles easily by hand. Sturdy construction. Height is adjustable for various size bottles. Cup ID is 1.090"

RETURN

Bottle Crowner, Hand, Light Duty

 Click on the picture for a larger view
T-18-110  Unit, complete
T-18-117 Steel Crowns, 100/Bag
For capping bottles by hand. Height is adjustable for any size bottle. Cup ID is 1.1".

RETURN

Bottle Guard, Leather

 Click on the picture for a larger view
T-03-140 6-1/2 oz
T-03-140 10/12 oz
T-03-140 16 oz
T-03-140 16 oz plasti-shield 
T-03-140 26 oz
T-03-140 32 oz
T-03-140 48 oz
T-03-140 64 oz
T-03-140 1 ltr
T-03-140 2 ltr
Protective guards for handshaking. N.R., Stubby and N.R. Tall available. Give height and diameter of bottle when ordering. If in doubt, send empty bottle for exact fit.

RETURN

Bottle Lifter

 Click on the picture for a larger view
T-18-150 10 to 16 oz bottles
T-18-153 10 oz plasti-shield 
Tubular, light weight and rugged. For half depth cases only. An excellent way to handle loose bottles. Custom sizes available.

RETURN

Bottle Style Dropper

 Click on the picture for a larger view
T-09-306 Glass dropper with bulb, no calibration
T-09-307 Plastic dropper with bulb, marked 0.5 and 1.0 ml
T-09-308 Plastic dropper with cap and bulb, 0.5 ml

RETURN

Bottle, Glass with Dropper

 Click on the picture for a larger view
T-09-335  30 ml/1 oz
T-09-336 60 ml/2 oz
T-09-337  4 oz with separate dropper
Glass bottle, amber color with glass dropper.

RETURN

Bottle, Plastic with Dropper

 Click on the picture for a larger view
T-09-394  Polyethylene, 2 oz 
The plastic dropper is calibrated at 0.5 and 1.0 ml.

RETURN

Broom

 Click on the picture for a larger view
T-19-212 Fine floor sweep, orange Polypropylene, 18"
T-19-213 Fine floor sweep, orange Polypropylene, 24"
T-19-215 Medium floor sweep, Polyester, 18"
T-19-216 Medium floor sweep, Polyester, 24"
T-19-218 Course floor sweep, Polypropylene, 18"
T-19-220 Course floor sweep, Polypropylene, 24" 
Our plastic floor sweeps meet the strictest sanitary applications. They do not absorb liquids, will not crack, chip or splinter. Select fine, medium or course sweeping.

RETURN

Broom Handle

 Click on the picture for a larger view
T-19-192 Handle, lacquered hardwood, 1-1/8" x 60"
T-19-196 Handle, stainless steel, 1" x 60"
T-19-214 Handle, fiberglass, 1" x 60"
T-19-217 Handle, plastic, 1" x 60"

RETURN

Brush, Glassware, Cleaning

 Click on the picture for a larger view
T-09-381 Pipet, nylon, 17" long, brush 7" x 1/4" to 3/4", tapered diameter
T-09-382 Test tube, bristle, 11" long, brush 4" x 1-3/8"
T-09-384 Cylinder, nylon, 16" long, brush 5" x 2" 
T-09-386 Cylinder, bristle, 20" long, brush 6" x 2-3/8" 
T-09-388 Volumetric flask, bristle, 14" long, brush 4" x 1-1/2"
RETURN

Buret, Automatic, Glass or Teflon Stopcock

 Click on the picture for a larger view
T-09-355 Buret kit, complete, 10 ml, Teflon stopcock
T-09-360 Buret kit, complete, 10 ml, glass stopcock
T-09-360 Buret kit, complete, 25 ml, Teflon stopcock
T-09-360 Buret kit, complete, 50 ml, Teflon stopcock
T-09-360 Stopcock grease, 5.3 oz tube 
All kits come complete with buret stem, stopcock, reservoir bottle, rubber stopper, glass air inlet tube, 3" rubber connection tube and rubber squeeze bulb. The bottle capacity for the 10 ml unit is 16 oz and 32 oz for the 25 and 50 ml units. All burets are calibrated in 1/10 ml divisions. Stopcock grease is available separately (for glass stopcocks).

RETURN

Buret, Automatic, Glass or Teflon Stopcock, Replacement Parts
T-09-356 10 ml buret w/glass stopcock
T-09-357 10 ml buret w/Teflon stopcock
T-09-361 25 ml buret w/Teflon stopcock
T-09-366 50 ml buret w/Teflon stopcock
T-09-359 Rubber Squeeze Bulb
T-09-362 Rubber Connection Tube, 3"
T-09-363 Glass Air Inlet Tube
T-09-364 Rubber stopper for 16 oz bottle 
T-09-367 Rubber stopper for 32 oz bottle
T-09-368 Glass reservoir bottle, 16 oz
T-09-369 Glass reservoir bottle, 32 oz 
T-03-189 Stopcock grease, 5.3 oz tube

RETURN

Buret, Automatic, Glass, Reservoir, Plastic

 Click on the picture for a larger view
T-09-380 10 ml with 1/20 divisions
T-09-383 15 ml with 1/20 divisions
T-09-385 25 ml with 1/20 divisions
T-09-387 50 ml with 1/20 divisions
This automatic self-zeroing glass buret has easy-to-read blue graduations against a white background. Squeezing the flexible plastic bottle forces liquid into the buret and any overfill drains back into the bottle when the pressure is released. This closed system insures non-contamination by external elements.

RETURN

Buret, Digital

 Click on the picture for a larger view
T-09-340 25 ml capacity
T-09-344 50 ml capacity
T-09-345 Adapter for 33 mm threads, 3/pk
T-09-346 Adapter for 38 mm threads, 3/pk 
This unit eliminates meniscus reading errors. It has a direct digital readout of the titrated volume and provides maximum accuracy to two decimal places. It is light weight and ruggedly constructed of chemically resistant plastics to enhance portability. It fits directly on bottles with 45 mm threads. The unit includes a lithium battery for over 60,000 titrations.

RETURN

Buret, Holder, Clamp and Stand

 Click on the picture for a larger view
T-09-338  Single
T-09-338  Double
Non-corrosive clamp holds buret firmly in place without obscuring graduations. Burets are easily inserted. Support stands and rods have no exposed metal parts. All exposed parts are polyethylene. Bases are 8" x 12" x 2" thick, weighted for stability. The 1/2" x 30" long rod screws into the base with a deep thread and sturdy tightening knob.

RETURN

Buret, Holder, Double with Support Stand

 Click on the picture for a larger view
T-09-420  Unit, complete
The base is 13" x 7" white procelain with 4 rubber feet. The rod is anodized aluminum, 1/2" diameter x 20" long. Holds all size straight burets.

RETURN
Click on the picture for a larger view

Buret, Straight Bore, Glass or Teflon Stopcock
T-09-347  10 ml, w/glass stopcock
T-09-348 25 ml, w/glass stopcock
T-09-349 50 ml, w/glass stopcock
T-09-350  100 ml, w/glass stopcock
T-09-351  10 ml, w/Teflon stopcock
T-09-352  25 ml, w/Teflon stopcock
T-09-353  50 ml, w/Teflon stopcock
T-09-354  100 ml, w/Teflon stopcock
T-03-189 Stopcock grease, 5.3 oz tube 
Precision bore manufactured to Class "A" tolerances from Pyrex brand glass

RETURN
Burner, Alcohol (Aluminum, Brass, Glass) and Natural Gas Click on the picture for a larger view
T-10-230 Glass, Alcohol, 4 oz capacity, adjustable positions 
T-10-230 Aluminum, Alcohol, 5 oz capacity, includes extra wick
T-10-230 Brass, Alcohol, 5 oz capacity, adjustable wick, snuffer cap, nickel plated 
T-10-230 Natural Gas
T-10-230 Replacement wicks for glass burner, 12/pk
T-10-230 Replacement wicks for aluminum burner, 12/pk 
T-10-230 Replacement wicks for brass burner, 12/pk
T-10-230 Wing tops for natural gas burner, 10/pk
The natural gas burner is designed with a stablizer to provide a steady flame for general laboratory use. Stable, heavyweight base with an optional wing top to produce a broad, flat flame for working glass and laboratory use. 6" high with 800-1200 BTU output.